The HT.S Standard Coupler is suitable for connecting two bars of the same diameter where one bar can be rotated.
The couplers are delivered to site welded to the appropriate rebars. The formation of the joint is achieved by screwing the male and female sections of the coupler together. The joint should be tightened using a wrench until no further movement is possible between the two sections.
The Two Sections are brought together.
The joint is then screwed together using a wrench.
Finished joint tightened until there is no further movement between sections.
| Coupler Ref | Rebar Dia (mm) | Dimensions (mm) | |||||
|---|---|---|---|---|---|---|---|
| A | B | C | D | E | L | ||
| HT.S.12 | 12 | 14 | 13 | 38 | 19 | 29 | 50 ± 2 |
| HT.S.16 | 14/16 | 18 | 15.5 | 41 | 25 | 32 | 60 ± 3 |
| HT.S.20 | 16/20 | 19 | 20 | 43 | 25 | 40 | 60 ± 3 |
| HT.S.25 | 25 | 25 | 25 | 55 | 34 | 50 | 70 ± 4 |
| HT.S.28 | 28 | 28 | 29 | 60 | 38 | 60 | 80 ± 4 |
| HT.S.32 | 32 | 32 | 32 | 63 | 42 | 63 | 80 ± 4 |
| HT.S.40 | 40 | 46 | 40 | 75 | 53 | 70 | 95 ± 5 |
| HT.S.50 | 50 | 50 | 50 | 85 | 65 | 85 | 105 ± 5 |
Skip to content
